Skip to main content

YOUR PROTECTION


CAT 1

Single base layer of fire resistant protection. Required minimum Arc Rating 4 cal/cm². PPE Categories are used to determine the necessary arc rating of a garment worn during a given job task.

CAT 1 rated clothing

CAT 2

One or more layers of fire resistant protection. Required minimum Arc Rating 8 cal/cm2. PPE Categories are used to determine the necessary arc rating of a garment worn during a given job task.

CAT 2 rated clothing


CAT 3

One or more layers of fire resistant protection. Required minimum Arc Rating 25 cal/cm2. PPE Categories are used to determine the necessary arc rating of a garment worn during a given job task.

CAT 3 rated clothing


CAT 4

One or more layers of fire resistant protection. Required minimum Arc Rating 40 cal/cm2. PPE Categories are used to determine the necessary arc rating of a garment worn during a given job task.

CAT 4 rated clothing


ANSI 107

The American National Standards Institute standard that specifies requirements for high-visibility safety apparel and headwear that is capable of visually signaling the user's presence. DragonWear® meets Class 2 and 3, Level 2.

ANSI 107 rated clothing


CSA Z96

Canadian Standards Association requirements for high-visibillity safety clothing for Canadian workers. DragonWear® meets standard z96-15, Class 2.

CSA Z96 certified clothing


GSA

GSA establishes long-term government-wide contracts with commercial firms to provide access to millions of commercial products and services at volume discount pricing. Go to www.gsaadvantage.gov for purchasing.


NFPA 70E

National Fire Protection Administration standard for electrical safety in the workplace.

NFPA 70E certified clothing


NFPA 1977

National Fire Protection Administration standard for wildland fire fighting. 

Certificate of compliance for Wildland Clothing

Certificate of compliance for Packs.

NFPA 1977 certified products


NFPA 2112

National Fire Protection Administration standard for protection of industrial personnel against flash fire. 

Certificate of compliance.

NFPA 2112 certified clothing


CAL FIRE

Approved for use by the Cal Fire Personal Protective Equipment Working Group

Cal Fire approved products

INDUSTRY TERMS AND DEFINITIONS

Flame/Fire Resistant (FR) - A fabric or product that resists ignition and self extinguishes after removal of the ignition source.

Flame Retardant - A chemical treatment applied to a flammable base fabric that gives it FR properties.

Inherent - An FR fabric that is made of fibers that are flame resistant due to the chemical structure of the fiber and which has not been chemically treated.

Treated - An FR fabric that takes a flammable fabric and treats it with a flame retardant chemical.

Vertical Flame Test - A basic test that determines whether or not a fabric is FR by measuring how much of the fabric is consumed after 12 seconds of flame exposure.

Char Length - A measurement of the damaged fabric after the Vertical Flame test.

Arc Rating - The value for fabrics that describes their performance under exposure to an electrical arc discharge. Testing determines when the amount of exposure results in a 50% probability of causing the onset of second-degree skin burn. The arc rating is expressed in cal/cm². It can be either an ATPV or an EBT.

ATPV - The Arc Thermal Performance Value of a fabric shown in cal/cm².

EBT - The Energy of Breakopen Threshold. The cal/cm² at which the fabric breaks open before it reaches its ATPV.

CAT - PPE Category. A term used specifically in NFPA 70E. If the 70E table is used, each specific task listed establishes one of five category requirements for the protective clothing and PPE to be worn while performing that task. Each category outlines the minimum arc rating (cal/cm²) for the FR clothing and other PPE required.